- For each experiment below, create a separate Multisim
circuit. (They can all be on the same Multisim page.)
- For experiments, use 12 volts, 60 Hz as the power source,
and use 2 ohm loads.
- Use virtual transformers (blue Basic Family icon).
- Don't connect the secondary's center tap to anything.
- Adjust the turns ratio on a single transformer to deliver 4
volts to the load.
- Put two transformers in parallel to deliver 4 volts to the
load.
- Put two transformers in series to deliver 72 volts to the
load.
|